CETOL MARINE LIGHT LITER

58.99$

SKU : 8920272 Catégories : ,

CETOL MARINE LIGHT LITER

By INTERLUX 

Cetol® Marine Light

Varnishes

Cetol® Marine Light creates a superb light amber, high gloss, hard wearing finish. It’s really easy to clean and has excellent UV protection thanks to its Next Wave™ UV-absorbing technology. However, it can’t be used on decks.

Good to know

  • Creates a light amber, high gloss, hard wearing topcoat finish
  • Next Wave™ UV-absorbing technology offers incredible UV protection
  • It can’t be used on decks

 

Description

Cetol Marine durable surface film protects the wood from the elements and the harsh marine environment.
It is formulated with Next Wave technology, special alkyd resin and high quality synthetic UV-absorbing pigments which shields wood against damaging UV rays.

  • Flexible and breathable
  • Satin translucent wood finish
  • Use above the waterline
  • Interior and exterior woods

VARNISH OR CETOL

Varnish is a clear, glossy finish that is applied to wood to protect it and give it a more attractive appearance. Cetol, on the other hand, is a finishing product specifically designed for wood surfaces exposed to harsh environmental conditions, such as those found at sea. Cetol is formulated with resins, pigments and Next Wave technology to provide long-lasting protection against UV, the elements and corrosion. In addition, it is designed to be flexible and breathable to allow the woods to expand and contract with the weather, preventing premature aging and wood cracking. In short, Cetol is a more suitable solution for wood surfaces at sea than conventional varnishes.

 

Technical data excerpt

Suitable for above the waterline
Exterior cabin/trims
Interior cabin/trims
Finish/Sheen
Satin
Suitable water types
Sea Water
Fresh Water
Brackish Water
Substrates
Wood
Safe for aluminum outdrives
Application method
Recommended no. of coats
Practical coverage (ft²/gal)
 Brush
2 – 3
8.84
Pack sizes
1 quart
Application Procedures
Cetol Marine / Cetol Marine Light / Cetol Marine Natural Teak
Always allow 24 hours drying time between coats. It is not recommended to sand in between coats of
Cetol on exterior wood.This will lower the overall layer thickness, which is very important for effective
product performance. For a smoother finish, scuff the surface lightly with a nylon scuffing pad. If you sand
between coats apply a fourth coat of Cetol to compensate for the reduced layer thickness.
To achieve a non-skid surface, evenly sprinkle Interlux® Intergrip 2398c Polymeric No-Skid Compound
onto the wet surface immediately after applying the second coat of Cetol. If needed, do the same after
the third coat as well.The addition of Intergrip 2398c will reduce the life of the Cetol Marine, Marine
Light or Cetol Marine Natural Teak may require more frequent reapplication and additional maintenance
coats. All coats of Cetol Marine, Marine Light or Cetol Marine Natural Teak should be applied within a
1-2 week period

Safety information

The safety datasheet contains detailed information for the current formulation of this product such as hazardous ingredients, first-aid measures, fire-fighting measures, handling and storage. To make sure you have the right datasheet, please find the corresponding color and formula on your can. The formula is usually on the bottom. We provide safety datasheets for each latest formula. For missing safety datasheets, please visit our MSDS search site

7 in stock