FLEXABAR VINYL-PVC ORANGE PAINT

42.99$

FLEXABAR‘s ORANGE PVC AND VINYL FLUORESCENT PAINT

FLEXABAR VINYL-PVC ORANGE PAINT

Apply with a brush or roller for best results. Do not use a felt roller, recommend a foam rubber roller. Best days for application are low humidity days and temperatures above 40°F.

HOW TO USE:
Surface must be completely dry and clean. Buoy Coating thinner is recommended for cleaning.
Stir Buoy Coating thoroughly from the bottom of the can until pigment is evenly distributed. Can be applied without thinning. If thinning is necessary, mix up to one part Buoy Coating Thinner to two parts Buoy Coating.
Before using the brush or roller, wash thoroughly with Buoy Coating Thinner. Brush small areas at a time.
Buoy Coating is dry to the touch in 30 minutes, it may cure overnight. The first coat must be touch dry before applying the second.
Two coats should be sufficient for normal use, but additional coats may be applied.
Thoroughly clean the brush or roller with Buoy Coating Thinner after use.

This is an excellent paint for numbering or lettering fisherman’s buoys and PVC mooring buoys.

VINYL-PVC ORANGE BUOY FLUORESCENT PAINT

For lobster or crab buoys Flexabar for PVC and vinyl inflatable buoys

– Chemically bonds with buoys for maximum durability.
– Colorfast and UV resistant
– Oil and gas resistant
– High visibility
– Superior adhesion – will not crack
– Commercially used and proven
– The choice of commercial fishermen around the world
– Rugged durability

FLUORESCENT colors available:

Orange

Light yellow

Light red

Light blue

Signal green

Size:

946 ml

pint

Weight:

1 Kilo

2.2 pounds

NOTES:

No warranty on paint shipped.

12 in stock