Hull equipment, Mechanic and Hydraulic, Sport Fishing Accessories

RULE BILGE PUMP LP900D

RULE 12V 900-GALLON LOW PROFILE PUMP (LP900D)
XYLEM RULE LOPRO 900D BILGE PUMP (AUTOMATIC)

Product Code: 5412090

Rule’s LoPro Series bilge pump is only 2.25″ high, but can pump up to 900 gallons per hour. It has a threaded discharge nozzle with straight and 90° connections, and an outlet that can rotate 180°, making it perfect for tight spaces and unusual configurations.

Features Industries and Applications Literature and Tools
General Overview

PRODUCT FEATURES

00(3407)
Model Number: LP900D
Volts(DC) : 12

900(3407)
Model Number: LP900D
Volts(DC) : 12

Choice of operation mode (automatic models)
Fully rotating discharge casing
Choice of discharge ports supplied with each pump
Non-return valve
Horizontal or vertical mounting

Our newest automatic pump design, the LoPro, allows for pumping in tight spaces and shallow holds. The LP900S uses a dual water sensing system to ensure the pump only operates when water is present and effectively shuts down when it is not. If water is detected, the pump spins the impeller for a double check. If water is confirmed, the pump operates to empty the bilges.

A second detection mode is also available. It allows the pump to be set to operate at either 1.3″ (3.25 cm) or 2″ (5 cm). The pump body swivels to allow discharge in either direction. A selection of straight and 90 degree ports, as well as a check valve for use with straight ports, are provided.

The LP900D has no sensors and can be operated by a manual switch or float switch.

– Electronic automatic mode.

– 900 gallons per hour capacity. The 900D automatic model can move 900 gallons of water per hour, even though it has a very low profile.
– Fully rotating discharge nozzle. The entire casing rotates 180°, making the pump extremely easy to install.
– Threaded discharge nozzle. Threads allow the discharge nozzle to be coupled to a straight or 90° fitting, both of which are included.
– Horizontal or vertical mounting. The 900S automatic model has a variety of mounting options to accommodate boat design.
– 12 VDC operation.
The tricuspid valve, also included, used with the straight fitting, can be used to reduce water backflow.

Specifications:

LP900D automatic model

– Voltage: 12 VDC
– Flow Rate: 900 gph free flow at 13.6 V
– Amperage: 4 Amps
– Port Configuration: ¾”, 1″, 1 1/8″ straight, 90 degree ¾”.
– Check valve can be used with straight connections.
– Height: 2.3
– Length: 7.6