Mechanic and Hydraulic

By eliminating metal-to-metal contact, “Dual-Flex” Marine and Industrial Engine Mounts remove the danger of any excessive impact.  The “Dual-Flex” mount design provides a synthetic rubber insulated engine mount for use on Gas and Diesel Marine Engines and in Industrial applications, and provides the following benefits.

• Reduce Vibration
• Absorb Shock
• Reduce Noise
• Resist rust with Aluminum Housings and Zinc Trivalent Plated Steel Components

The special design and construction of the “Dual-Flex” Engine Mount give your application a soft, cushioning effect under normal loads.  There is no metal-to-metal contact between supporting and mounting members.  As loads increase from normal, the resistance of the mount increases very rapidly with a small amount of deflection.

Both vertical and lateral adjustment features are part of the design.  The threaded stud on each mount is equipped with hex jam nuts.  Simply turn the lower nut to bring the engine to the exact height you desire.  Then lock the upper nut to hold it in position.  Slotted holes are included in the casting to provide for lateral adjustment at installation.

The Dual-Flex has a synthetic rubber element that will withstand temperature extremes and exposure to salt, oil and grease.

Dual-Flex mountings are available in several different sizes for most models of marine engines.  Many models are available from stock for off-the shelf delivery.

5.25 INCHES CENTER HOLES