MASTHEAD LIGHTS SERIES 200

162.99$175.99$

SKU : 65922 Catégories : , ,

MASTHEAD LIGHTS SERIES 200

The color of the light seen on the other vessel encountered helps determine which one has the right of way. To do this, it is important to know the different lights and how to interpret them.

The MASTHEAD LIGHTS  series 200 navigation lights are essential equipment for the safety of vessels at sea. They allow other vessels and rescue boats to spot your boat in darkness or in reduced visibility. There are different types of navigation lights that can be installed in different locations on a vessel, each with a specific function.

The 200 series navigation lights at the front of the vessel are called bow lights. They emit a white light that indicates the direction of travel. The navigation lights at the rear of the vessel are called stern lights. They emit a white light that indicates the opposite direction of navigation.

Side lights are installed on the sides of the vessel. They emit a green light for ships sailing to the left and a red light for ships sailing to the right. The side navigation lights allow other vessels to determine the width of the vessel and avoid it in case of danger.

Mast lights are installed on the mast of the vessel. They emit a white or red light to indicate the presence of a vessel. Mast lights can also be used to signal an emergency situation or kind of fishing vessel.

Position lights are installed on the sides and stern of the vessel to indicate its position. There are bow and stern, starboard and port position lights, which are turned on depending on the direction of travel.

In summary, navigation lights are essential to the safety of vessels at sea and must be installed correctly and maintained in good condition. It is important to know the different types of navigation lights and their respective locations to ensure safe navigation.

MASTHEAD LIGHTS BY PERKO

Base Mount RED 360 DEGREE

Base mount GREEN 360 DEGREES

360 DEGREE WHITE base mount

Certified for use on sail or power boats less than 20 meters (65.6 feet) in length.

Technical information:

Voltage: 12 or 24 Volt Bulb included.
For 32 volts, please contact the factory
Bulb power: 25 watts or 10 watts
Amperage: 25 watts – 2.08 amps (12 Volt) / 1.04 amps (24 Volt)
10 watts – 0.83 amps (12 volts) / 0.42 amps (24 volts)
Screw size: #10
Overall height: 4-7/8″.
Lens height: 2-3/4
Outside diameter of base: 3-5/16
Projection in inches: 3-5/16
Arc of visibility: 360 degree

Black Polymer
2-Miles (USCG 2nm) Certified_.42 amps (24 Volt)Screw Size__ or 24 Volt Bulb Included
For 32 Volt please contact the factory